Custom, Precision Pressure Instrumentation: Pressure Transducers, Transmitters & Temperature Probes

From satellites in outer space, oceanographic equipment submerged under miles of sea water to oil well data logging systems thousands of feet below the earth's surface, Paine Electronics custom pressure instrumentation has been utilized to operate flawlessly in the toughest environments.

Low Level Series:

210-65

± 500 to ± 5000 PSID

This transducer is unique because of its small size. The unit has two separate sensing elements to measure the pressure at the input ports. Each sensor has two strain gage legs. These two sensors are connected to provide a fully balanced bridge. This sensing method provides an output directly proportional to the pressure difference at the two ports.

Models are also available which contain two sensing elements whose output ratio is precisely matched to the area ratio of your bi-directional hydraulic actuator. Two cylinder head pressures go in and out comes a signal proportional to actuator force.

For applications requiring long term stability at high temperatures (up to 250°F) in corrosive environments.
Wide range of pressure options.
Small size and rugged design.
All welded Stainless Steel construction.

"Let's work together to design your next custom device"

Custom Request:

Need something new? Most of Paine's products are custom made to fit individual requirements. If you cannot find a product to match your current and/or future requirements, please contact us today at 509-881-2100.

(Select image for larger view)

Paine Electronics, LLC

5545 Nelpar Drive

East Wenatchee, WA 98802

Telephone: 509-881-2100

Fax: 509-881-2115

moreinfo@paineelectronics.com

210-65

Pressure

Pressure Range:	± 500 to ± 5000 PSID
Proof pressure:	150% of rated range (line and differential)
Burst pressure:	250% of rated range (line and differential)

Thermal Properties

Operating temperature range:	0°F to +250°F
Compensated temperature range:	+50°F to +150°F
Thermal zero shift:	0.03% F.S. per °F max
Thermal sensitivity shift:	0.01% F.S. per °F max

Accuracy

Static error band:	± 0.25-0.35 % F.S. max. (best straight line method)
Repeatability:	Within ± 0.1% F.S. max

Physical Properties

Pressure media:	Any compatible with 2024-T351 AL, 300 series CRES, 15-5 PH CRES, BUNA-N rubber
Weight:	1.8 ounces max
Pressure port:	Manifold pressure port per MIL-P-5514 type II, Class 2. Recommended o-rings MS28775-008 supplied with transducer. Pressure port adapters available manifold to 1/4 O.D. flared tube fitting. Our part no. 247-99-700-02.

Electrical

Excitation:	10 VDC
Input resistance:	350 ± 70 ohms
Output resistance:	350 ± 35 ohms
Output at zero pressure:	0 ± 10 % F.S.
Full scale (F.S.) sensitivity:	P1 = 2 mV/V ± 10% P2 = P1 ± 2% of P1

Environmental

Acceleration:	20 G's per MIL-STD-810, METHOD 513.1, PROC. I
Vibration:	20 G's per MIL-STD-810, METHOD 514.1, PROC. V
Shock:	30 G's per MIL-STD-810, METHOD 516.1, PROC. IV

Error due to combined effect of shock, vibration, and acceleration shall be less
than 0.01% of F.S. per G.

Electrical Connections

Connector Version
Pin A:	(+) excitation
Pin B:	(+) signal
Pin C:	(-) signal
Pin D:	(-) excitation
	Polarity as shown when pressure at P1 is greater than at P2. Mating connector is not supplied. Connector mates with MS3116-8-4S (Bendix PTO6A-8-4S-(SR)) or equivalent. Our part no. 247-99-100-01.
Cable Version
Red:	(+) excitation
Green:	(+) signal
White:	(-) signal
Black:	(-) excitation
	Polarity as shown when pressure at P1 is greater than pressure at P2. Supplied with 18 No. 28 AWG 4 conductor Teflon insulated, shielded and Teflon jacketed cable.

Translate to Spanish | Translate to French | Translate to Italian | Translate to German

Logos & other trademarks used herein are the property of their respective owners | Agreement & Use of Paine Product Information