Custom, Precision Pressure Instrumentation: Pressure Transducers, Transmitters & Temperature Probes

From satellites in outer space, oceanographic equipment submerged under miles of sea water to oil well data logging systems thousands of feet below the earth's surface, Paine Electronics custom pressure instrumentation has been utilized to operate flawlessly in the toughest environments.

213-36-740 Series:
Amplified, High Pressure

0 - 4,200 PSIA

 

 

This space qualified 0 - 4200 PSIA high pressure amplified transducer was designed decades ago for mission critical satellite and space probe missions. From fuel pressure monitoring systems on satellites and space probes to servo-valves and actuators on space vehicles, these units are designed to tolerate high levels of shock and vibration without damage.

With customizable external features such as connector types, pressure port configurations and mounting methods, these transducers are well suited for remote applications that require extreme accuracy and long term performance in a small location.

 

"Let's work together to design your next custom device"

 

 

Custom Request:

Need something new? Most of Paine's products are custom made to fit individual requirements. If you cannot find a product to match your current and/or future requirements, please contact us today at 509-881-2100.

 

 

 

Need Calibration Data?

We can provide you with a copy of your original data

 

 

Contact us today!

 

 

 

Paine Electronics, LLC

5545 Nelpar Drive

East Wenatchee, WA  98802

Telephone: 509-881-2100

Fax: 509-881-2115

moreinfo@paineelectronics.com

 

 

213-36-740

 

Pressure Data
Pressure Range: 0 - 4,200 PSIA
Proof pressure: 6,300 PSIG
Burst pressure: 10,500 PSIG
   

Thermal Properties
Operating temperature range: -29°C to +60°C
Compensated temperature range: +6°C to +60°C
   

Accuracy
Total Error Band Including Nonlinearity, Hysteresis and Thermal Effects:  ± 75 mV (Best straight line method)
   

Physical Properties
Pressure media: Any compatible with 15-5 PH, H1025 CRES and 304L CRES
Weight: 8 ounces max

Transducers designated PSIS have sealed reference chambers.

The voltage output is referenced to 14.696 PSIA.

Electrical
Input Voltage: +22.0 to +39.0 Vdc, Reverse Voltage Protected
Input Current: 30 mA max (1.02 W at 34 Vdc)
Output Voltage: 0-5 Vdc
Output Impedance: 150 ohms max
Output Load: > 0.5 Mohms, 100 kohms short circuit protected
Input/output isolation: 100 Mohms min at 100 Vdc for 30 seconds

Environmental
Acceleration: 20 G's per MIL-STD-810, METHOD 513.1, PROC. I
Vibration: 20 G's per MIL-STD-810, METHOD 514.1, PROC. V, PART I
Shock: 30 G's per MIL-STD-810, METHOD 516.1, PROC. IV

Error due to combined effect of shock, vibration, and acceleration

shall be less than 0.01% of F.S. per G.

Electrical Connections
Pin A: + Input
Pin B: Input Return
Pin C: No Connection
Pin D: Signal Return
Pin E: Signal Output
PIN F: Case Ground

Mates with MS3116-10-6S (Bendix PT06A-10-6S-(SR)) or equivalent.

Our part no. 247-99-100-02. Mating connector not supplied with transducer.

 

Translate to Spanish | Translate to French | Translate to Italian |  Translate to German

© Copyright Paine Electronics, LLC. All rights reserved.  Privacy Statement  Click Here to Make Paine Your Home Page

Logos & other trademarks used herein are the property of their respective owners | Agreement & Use of Paine Product Information